Dump trailers for agriculture

7T

 

 

 

 

DESIGN:

The box of the Humus 7T trailer is made with a minimum number of parts, which significantly increases the strength of the box. The box can also be reinforced with a bottom and sides made of wear proof steel Hardox 450, increasing the durability and resistance, allowing the transportation of rocks and other heavy materials without damaging the trailer. The design of Humus trailers is simple and straightforward for best functionality.

FUNCTIONALITY:

Humus 7T trailer has a 50° tipping angle, ensuring effective and safe unloading even with materials with a higher friction resistance. Unloading is also made easier by various back hatches. Standard equipment includes a back hatch, which opens mechanically as well as hinges outwards onto the side of the trailer. Various hydraulic hatches are available as accessory equipment. A hydraulic hatch opens higher than the upper edge of the box, which makes unloading higher loads easier.

Customers of the construction business have the opportunity of adding loadinghooks into the box of the trailer in order to make the transport of tools and heavy equipment faster and more comfortable. By adding side extensions, the volume of 9T and 12T trailers can be increased by nearly 100%. The product range of small dumpers enable the customers to find the suitable product based on volume as well as loading capacity.

More information. 

9ST

 

 

 

 

WHY HUMUS 9ST?

Farmers have chosen Humus 9ST because it’s easy to use and helps them increase their efficiency for the following reasons:

  • The Humus 9ST tractor trailer has a bogie axle, which helps to cover difficult terrain and hydraulic brakes;
  • The Humus 9ST trailer tilts up to 60 degrees and so it’s easier and faster to get the material off the box;
  • Minimum number of parts have been used to produce the box, so the box is very strong;
  • Two back hatches are in standard – the construction hatch and up-hanging hatch.

EASE OF USE AND ACCESSORIES:

Transportation of the trailer and transportation of materials and machinery with the trailer is simple because:

  • It’s very easy to attach the trailer into a truck load because it has 4 attachment points beneath the box;
  • It’s very easy to transport machinery and materials with the trailer because in standard solution it has 4 fastening hooks inside and 4 outside of the box to fasten the load.

More information. 

12T

 

 

 

 

DESIGN:

The Humus 12T trailer box is made with a minimum number of parts, which significantly increases the strength of the box. The box can also be reinforced with a bottom and sides made of wear proof steel Hardox 450, increasing the durability and resistance, allowing the transportation of rocks and other heavy materials without damaging the trailer. The design of Humus trailers is simple and straightforward for best functionality.

FUNCTIONALITY:

Humus 12T trailer has a 50° tipping angle, ensuring effective and safe unloading even with materials with a higher friction resistance. Unloading is also made easier by various back hatches. Standard equipment includes a back hatch, which opens mechanically as well as hinges outwards onto the side of the trailer. Various hydraulic hatches are available as accessory equipment. A hydraulic hatch opens higher than the upper edge of the box, which makes unloading higher loads easier.

Customers of the construction business have the opportunity of adding loadinghooks into the box of the trailer in order to make the transport of tools and heavy equipment faster and more comfortable. By adding side extensions, the volume of the 12T trailer can be nearly doubled. The product range of small dumpers enable the customers to find the suitable product based on volume as well as loading capacity.

More information.

12VP

 

 

 

 

DESIGN:

We have manufactured the Humus VP trailers with as few different parts as possible, in order to keep the most simplistic design. The bottom of the box/platform is solved with a single continuous sheet, which significantly increases the durability of the trailer. The primary wish of the Humus team is to offer simple product design with the best functionality.

FUNCTIONALITY:

Humus VP trailers have a 50° tipping angle, ensuring effective and safe unloading even with materials with a higher friction resistance. Unloading is made easy and comfortable with a mechanically locked back hatch which can be handled with one lever and is fully galvanized. In addition, the back hatch has a smaller grain hatch with the possibility of installing a grain auger, in order to ease the transport of grain.

The trailer is multifunctional, suitable for using as a platform as well as a grain trailer. The VP trailer is constructed as a platform trailer, which can be turned into a grain trailer with side extensions. Extensions are made in two parts and the trailer can also be used with low and high sides. Side extensions can be quickly assembled and removed from the trailer.

More information.

18T

 

 

 

 

DESIGN:

The Humus 18T dumper has a 50° tipping angle, which together with the half-pipe body ensures effective and safe unloading even for materials with a higher friction coefficient. Unloading is made easy with the hydraulic back hatch as part of standard equipment, which opens higher than the upper edge of the box, so that even a piled load can be unloaded. Side extensions can be added to the 13 m³ box of the Humus 18T dump trailer, resulting in a 23 m³ box.

FUNCTIONALITY:

A grain auger can be installed for Humus 18T, making the transport of grain faster and easier. In addition, the camera system, which helps with unloading grain from a harvester as well as with backing, has received a lot of positive feedback. Thanks to the camera system, the driver does not need to get out of the tractor to find out when the load is full or completely unloaded. A covertent, toolbox and rear light covers have been developed to increase the efficiency of work.

More information.

18T+

 

 

 

 

DESIGN:

The Humus 18T+ dumper has a 50° tipping angle, which together with the half-pipe body ensures effective and safe unloading even for materials with a higher friction coefficient. Unloading is made easy with the hydraulic back hatch as part of standard equipment, which opens higher than the upper edge of the box, so that even a piled load can be unloaded. Side extensions can be added to the 23 m³ box of the Humus 18T+ dump trailer, resulting in a 33 m³ box.

FUNCTIONALITY:

A grain auger can be installed for Humus 18T+, making the transport of grain faster and easier. In addition, the camera system, which helps with unloading grain from a harvester as well as with backing, has received a lot of positive feedback. Thanks to the camera system, the driver does not need to get out of the tractor to find out when the load is full or completely unloaded. A covertent, toolbox and rear light covers have been developed to increase the efficiency of work.

More information.